Coloplast - From: 33444 To: 33446 - Biatain Silicone Lite Foam Dressing 5 X 5 In (12 1/2 X 12 1/2 Cm)

Products Details

Usage

Biatain Silicone Lite can be used for a wide range of low exuding wounds, including leg ulcers, pressure ulcers, non-infected diabetic foot ulcers, donor sites, postoperative wounds and skin abrasions. Biatain Silicone Lite is suitable for use on non-to-low exuding wounds and can be used in combination with compression therapy.

Unique 3D foam structure for superior absorption

When in contact with exudate, the unique 3D foam of Biatain Silicone Lite conforms to the wound bed. The fluid handling properties of Biatain Silicone Lite ensure optimal control of exudate thus minimizing the risk of maceration and leakage. [link to movie where the 3D foam structure is shown]

Secure fit

The silicone wound contact layer provides a secure fit to keep the dressing in place while ensuring minimal pain upon removal.

Non-touch opening

Biatain Silicone Lite has a 3-piece non-touch opening to allow aseptic and easy application and to reduce waste of dressings.  
[link to movie where the product is put on]

Soft, ultra flexible and comfortable

The soft and ultra flexible design of Biatain Silicone Lite ensure a close fit to wound and body, and the thin foam pad at skin level makes the product comfortable to wear. Biatain Silicone Lite is thereby especially suited for wounds and patients that need increased mobility.

Bacteria and waterproof

The permeable outer film is both  bacteria- and waterproof.

Mode of action

The unique 3D foam absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist to ensure for optimal moist wound healing conditions.

Product composition

Biatain Silicone Lite is a thin, ultra flexible and absorbent polyurethane foam dressing with a semi-permeable, water- and bacteria proof top film and a soft silicone adhesive. 

waterproof

outer

Usage

Biatain Silicone Lite can be used for a wide range of low exuding wounds, including leg ulcers, pressure ulcers, non-infected diabetic foot ulcers, donor sites, postoperative wounds and skin abrasions. Biatain Silicone Lite is suitable for use on non-to-low exuding wounds and can be used in combination with compression therapy.

Unique 3D foam structure for superior absorption

When in contact with exudate, the unique 3D foam of Biatain Silicone Lite conforms to the wound bed. The fluid handling properties of Biatain Silicone Lite ensure optimal control of exudate thus minimizing the risk of maceration and leakage. [link to movie where the 3D foam structure is shown]

Secure fit

The silicone wound contact layer provides a secure fit to keep the dressing in place while ensuring minimal pain upon removal.

Non-touch opening

Biatain Silicone Lite has a 3-piece non-touch opening to allow aseptic and easy application and to reduce waste of dressings.  
[link to movie where the product is put on]

Soft, ultra flexible and comfortable

The soft and ultra flexible design of Biatain Silicone Lite ensure a close fit to wound and body, and the thin foam pad at skin level makes the product comfortable to wear. Biatain Silicone Lite is thereby especially suited for wounds and patients that need increased mobility.

Bacteria and waterproof

The permeable outer film is both  bacteria- and waterproof.

Mode of action

The unique 3D foam absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist to ensure for optimal moist wound healing conditions.

Product composition

Biatain Silicone Lite is a thin, ultra flexible and absorbent polyurethane foam dressing with a semi-permeable, water- and bacteria proof top film and a soft silicone adhesive. 

waterproof

outer

Biatain Silicone Lite Foam Dressing 10/Box,

Usage

Biatain Silicone Lite can be used for a wide range of low exuding wounds, including leg ulcers, pressure ulcers, non-infected diabetic foot ulcers, donor sites, postoperative wounds and skin abrasions. Biatain Silicone Lite is suitable for use on non-to-low exuding wounds and can be used in combination with compression therapy.

Unique 3D foam structure for superior absorption

When in contact with exudate, the unique 3D foam of Biatain Silicone Lite conforms to the wound bed. The fluid handling properties of Biatain Silicone Lite ensure optimal control of exudate thus minimizing the risk of maceration and leakage. [link to movie where the 3D foam structure is shown]

Secure fit

The silicone wound contact layer provides a secure fit to keep the dressing in place while ensuring minimal pain upon removal.

Non-touch opening

Biatain Silicone Lite has a 3-piece non-touch opening to allow aseptic and easy application and to reduce waste of dressings.  
[link to movie where the product is put on]

Soft, ultra flexible and comfortable

The soft and ultra flexible design of Biatain Silicone Lite ensure a close fit to wound and body, and the thin foam pad at skin level makes the product comfortable to wear. Biatain Silicone Lite is thereby especially suited for wounds and patients that need increased mobility.

Bacteria and waterproof

The permeable outer film is both  bacteria- and waterproof.

Mode of action

The unique 3D foam absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist to ensure for optimal moist wound healing conditions.

Product composition

Biatain Silicone Lite is a thin, ultra flexible and absorbent polyurethane foam dressing with a semi-permeable, water- and bacteria proof top film and a soft silicone adhesive. 

waterproof

outer

Usage

Biatain Silicone Lite can be used for a wide range of low exuding wounds, including leg ulcers, pressure ulcers, non-infected diabetic foot ulcers, donor sites, postoperative wounds and skin abrasions. Biatain Silicone Lite is suitable for use on non-to-low exuding wounds and can be used in combination with compression therapy.

Unique 3D foam structure for superior absorption

When in contact with exudate, the unique 3D foam of Biatain Silicone Lite conforms to the wound bed. The fluid handling properties of Biatain Silicone Lite ensure optimal control of exudate thus minimizing the risk of maceration and leakage. [link to movie where the 3D foam structure is shown]

Secure fit

The silicone wound contact layer provides a secure fit to keep the dressing in place while ensuring minimal pain upon removal.

Non-touch opening

Biatain Silicone Lite has a 3-piece non-touch opening to allow aseptic and easy application and to reduce waste of dressings.  
[link to movie where the product is put on]

Soft, ultra flexible and comfortable

The soft and ultra flexible design of Biatain Silicone Lite ensure a close fit to wound and body, and the thin foam pad at skin level makes the product comfortable to wear. Biatain Silicone Lite is thereby especially suited for wounds and patients that need increased mobility.

Bacteria and waterproof

The permeable outer film is both  bacteria- and waterproof.

Mode of action

The unique 3D foam absorbs the exudate vertically and locks the fluid away within its structure, still leaving the wound moist to ensure for optimal moist wound healing conditions.

Product composition

Biatain Silicone Lite is a thin, ultra flexible and absorbent polyurethane foam dressing with a semi-permeable, water- and bacteria proof top film and a soft silicone adhesive. 

waterproof

outer

Drsg Wnd Biatain Fm - Each
Drsg Wnd Biatain Fm - Each

Customer Reviews

Product Information